Installation (Driver-Side)
WARNING: This page is about a different car, the 1994 GMC Safari and 1994 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Install horn contact, steering wheel inflator module connector and CPA clip. Install inflator module to steering wheel. Tighten inflator module screws to proper specification. See TORQUE SPECIFICATIONS .
- To complete installation, reverse removal procedure. Reactivate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Check AIR BAG warning light to ensure system is functioning properly. See TESTING - SYSTEM OPERATION CHECK .