Fuel Tank: Installation
WARNING: This page is about a different car, the 2003 Pontiac Bonneville, 2003 Buick Park Avenue, and 2003 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
- Position and support the fuel tank with the aid of an assistant. Install the fuel tank straps. Install the fuel tank strap bolts. Tighten the fuel tank strap bolts to TORQUE SPECIFICATIONS . Connect the fuel sender electrical connector.
- Install the fuel sender electrical harness into the retainers. Install the fuel and EVAP retainer to the frame. Connect the EVAP pipe to the EVAP canister. Connect the fuel feed pipe and the fuel return pipe. Install the rear suspension support assembly. See appropriate REAR article in SUSPENSION. Connect the fuel filler hose to the fuel filler pipe. Tighten the clamp to specification.
- Install the filler pipe opening cover. Lower the vehicle. Add fuel to the fuel tank. Install the fuel tank filler pipe cap. Connect the negative battery cable. Perform the following procedure in order to inspect for leaks. Turn ON the ignition switch for 2 seconds. Turn OFF the ignition switch for 10 seconds. Turn ON the ignition switch. Inspect for fuel leaks. Install the fuel injector sight shield.