Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
- Disable the SIR system. Refer to SIR Disabling and Enabling Zone 7 .
- Remove the front seat back cover. Refer to Seat Back Cover and Pad Replacement - Front in Seats.
- Disconnect the electrical connector (3) from the side impact module.
- Remove the side impact module fasteners (1).
- Remove the side impact module (2).
- Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling and Scrapping .