Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Tab

Courtesy of GENERAL MOTORS CORP.

Insert the tab on the module to the opening.

Fig 2: Removing/Installing Coil Bolt

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer toFastener Notice in Cautions and Notices.

Install the radio antenna module coil bolt.
Tighten: Tighten the bolt to 6 N.m (53 lb in).
Connect the radio antenna module coil connector at the glass.
Install the left rear quarter upper trim panel. Refer to Trim Panel Replacement - Rear Quarter Upper in Interior Trim.