Installation Procedure
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- If required, install the generator battery temperature sensor to the battery.
- Install the generator battery.
- Install the generator battery bolts.
Tighten: Tighten the bolts to 10 N.m (89 lb in).
- Install the generator battery cables (1-4) to the batteries.
- Install the generator battery nuts (1-4) to the battery cables.
Tighten: Tighten the nuts to 8 N.m (71 lb in).
- Install the generator battery temperature sensor wiring harness. Refer to Generator Battery Temperature Sensor Wiring Harness Replacement .
NOTE:
Refer to Fastener Notice
.