LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1292 (Antilock Brake System) >> Repair Instructions >> Deceleration Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the LH front seat. Refer to SEAT REPLACEMENT - FRONT BUCKET in Seats.
  2. Remove the bolt (1) and the upper deceleration sensor bracket (2).
    Fig 1: Removing Bolt And Upper Deceleration Sensor Bracket
    G01546257Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the deceleration sensor electrical connector.
  4. Remove the two bolts (1) that retain the deceleration sensor (2).
  5. Remove the deceleration sensor (2) from the vehicle.
Fig 2: Removing Deceleration Sensor
G01546258Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals