Installation Procedure
WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
- Install the battery (5) into the vehicle. Position the battery into the carrier.NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the battery hold down bracket (2). Secure with the bolt (4).
Tighten
Tighten the battery hold down bracket bolt to 8 N.m (71 lb in).
- Connect the positive (+) battery cable (1) to the positive (+) battery terminal.
Tighten
Tighten the positive battery cable-to-battery terminal to 15 N.m (11 lb ft).
- Install the negative (-) battery terminal.
Tighten
Tighten the negative battery cable-to-battery terminal to 1 N.m (11 lb ft).