LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1323 (Cruise Control System) >> Repair Instructions >> Cruise Control Cable Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cruise Control Cable Components
    GM181797Courtesy of GENERAL MOTORS CORP.
  1. Loosen the cable adjusting locknuts (1).
  2. Remove the cruise control servo cable (2) from the bracket.
  3. Remove the cruise control cable (2) from the throttle lever (3).

    Opening the throttle lever by hand will aide in the removal of the cruise cable.

    4. Fig 2: Cruise Control Servo Cover & Tabs
    GM844775Courtesy of GENERAL MOTORS CORP.
  4. Remove the cruise control servo cover (1) by applying slight outward pressure to both sides at the base of the cover (2).
    5. Fig 3: Cruise Control Cable At Servo Lever
    GM844777Courtesy of GENERAL MOTORS CORP.
  5. Remove the cruise control cable bracket screw (5).
  6. Remove the cruise control cable (4) from the bracket.
  7. Remove the cruise control cable (4) from the servo lever (1).
  8. Remove the cruise control servo cable from the vehicle by removing the cable from the cable guide clips.
scientia non olet · About LEMON Manuals