Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Install the bulb (1) to the socket.

Fig 1: License Lamp Bulb
Courtesy of GENERAL MOTORS CORP.
Wipe the bulb to ensure the bulb is free of dirt or oil.
Position the license lamp lens to the liftgate.
Verify that the license lamp lens gasket is fully seated to the liftgate.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
Install the 2 license lamp lens retaining screws.
Tighten: Tighten the screws to 1.4 N.m (12 lb in).

Fig 2: License Lamp Lens Screws
Courtesy of GENERAL MOTORS CORP.