Unable To Select Gears: Notes
- Did you review the clutch symptom operations and perform the necessary inspections? If yes, go to next step. If no, see DIAGNOSTIC STARTING POINT .
- Inspect the fluid level in the master cylinder. Is the fluid at the proper level? If yes, go to next step. If no, go to step 4.
- Diagnose the transmission. Does the clutch system operate properly? If yes, system is okay. If no, go to next step.
- Inspect the master cylinder. Is the master cylinder worn or faulty? If yes, go to next step. If no, go to step 6.
- Replace the clutch master cylinder. See CLUTCH MASTER CYLINDER & RESERVOIR under REMOVAL & INSTALLATION. Does the clutch operate properly? If yes, system is okay. If no, go to next step.
- Inspect the concentric slave cylinder. Is the concentric slave cylinder worn or faulty? If yes, go to next step. If no, system is okay.
- Replace the concentric slave cylinder. See CONCENTRIC SLAVE (ACTUATOR) CYLINDER under REMOVAL & INSTALLATION. Operate the system in order to verify the repair.