Trailer Hitch: Service and Repair

Trailer Hitch Replacement

Removal Procedure

1. Remove the rear bumper impact bar.




2. Remove 4 nuts and 2 stud plate assemblies securing the trailer hitch to each frame rail.
3. Remove the hitch from the frame rails.

Installation Procedure






Notice: Refer to Fastener Notice in Service Precautions.

1. Install the trailer hitch to each frame rail with 4 nuts and 2 stud plate assemblies.

Tighten the trailer hitch nuts to 90 N.m (66 lb ft).

2. Install the rear bumper impact bar.