Lumbar Switch Replacement

Lumbar Switch Replacement

Removal Procedure

1. Remove the seat from the vehicle.




2. Remove the 3 screws securing the trim panel to the seat.




3. Disconnect the electrical connector from the switch.




4. Remove the switch from the trim panel by snapping the switch out of the plastic retaining tabs.
5. Remove the switch assembly.

Installation Procedure




1. Install the switch assembly to the trim panel by snapping the switch into the plastic retaining clips.




2. Install the electrical connector to the switch.




3. Install the trim panel to the seat with 3 screws.
4. Install the seat to the vehicle.