Battery Replacement

REMOVAL PROCEDURE

CAUTION: Refer to Batteries Produce Explosive Gases Caution in Service Precautions.




1. Disconnect the negative battery cable.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

2. Disconnect the positive battery cable.
3. Remove the battery hold down retainer nut.
4. Remove the battery hold down retainer.
5. Remove the battery.

INSTALLATION PROCEDURE




1. Install the battery.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the battery hold down retainer.
3. Install the battery hold down retainer nut.

Tighten
Tighten the battery hold down retainer nut to 17 N.m (13 lb ft).

4. Connect the positive battery cable.

Tighten
Tighten the positive battery cable bolt to 15 N.m (11 lb ft).

5. Connect the negative battery cable.