LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Lumbar Switch Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the seat from the vehicle. Refer to SEAT REPLACEMENT - Bucket  or SEAT REPLACEMENT - Bench .
  2. Remove the 3 screws securing the trim panel to the seat.
    Fig 1: Removing Screws Securing Trim Panel To Seat
    G01478043Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector from the switch.
    Fig 2: Disconnecting Electrical Connector From Switch
    G01478044Courtesy of GENERAL MOTORS CORP.
  4. Remove the switch from the trim panel by snapping the switch out of the plastic retaining tabs.
  5. Remove the switch assembly.
    Fig 3: Removing Switch From Trim Panel By Snapping Switch Out Of Plastic Retaining Tabs
    G01478045Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals