Removal Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Disable the SIR system. Refer to SIR Disabling and Enabling Zone 1 .
- Disconnect the electrical connector.
- Remove the connector position assurance (CPA) from the connector.
- Remove the sensor bolt.
- Remove the sensor (2) from the vehicle.