LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2003 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Seat Position Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the passenger or driver's seat from the vehicle. Refer to Seat Replacement - Front Bucket in Seats.
  2. Disconnect the electrical connector from the seat position sensor.
    3. CAUTION: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.
    Fig 1: Seat Adjuster Track Bracket
    GM833594Courtesy of GENERAL MOTORS CORP.
  3. Drill out the rivets that retain the seat position sensor (1) to the seat adjuster track bracket.
  4. Remove the seat position sensor from the seat adjuster track bracket.
scientia non olet · About LEMON Manuals