Removal Procedure

IMPORTANT: Replace the CD and plastic bin as a whole assembly. Removing and installing the screws that attach the CD changer to the plastic bin may cause the CD changer to perform improperly.

Open the armrest (5) on the center console to reveal the remote CD changer assembly.
Remove the 2 front screws (1) and the rear screw (3) that attach the CD changer assembly to the center console.

Fig 1: Locating Remote CD Changer Assembly Components
Courtesy of GENERAL MOTORS CORP.
Pull the CD changer assembly vertically out of the center console
Disconnect the electrical connector to the CD changer (4).