LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2004 >> Yukon/Denali 4WD V8-5.3L VIN T >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Relays and Modules - Transfer Case >> Control Module >> Service and Repair >> NVG 246-NP8 >> Transfer Case Shift Control Module Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Transfer Case Shift Control Module Replacement

Transfer Case Shift Control Module Replacement

Removal Procedure





1. Disconnect the shift control module electrical connectors





2. Unsnap and remove the shift control module from the bracket.

Installation Procedure





1. If a NEW control module is being installed, program the new module. Refer to Transfer Case Control Module Reprogramming.
2. Install the shift control module to the bracket.





3. Connect the shift control module electrical connectors.
4. Start the engine and test the automatic transfer case system for proper shift operation.
scientia non olet · About LEMON Manuals