LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2005 >> Jimmy Part Time, Standard >> Repair and Diagnosis >> Steering >> Steering Linkage (Non-Rack & Pinion) >> Repair Instructions >> Steering Damper Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of Differential Carrier Shield
    GM141840Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the steering linkage shield. Refer to Steering Linkage Shield Replacement .
  3. Remove the differential carrier shield mounting bolts.
  4. Remove the differential carrier shield.
    5. Fig 2: View Of Steering Shock Absorber
    GM291256Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Use the proper tool in order to separate all ball joints.
  5. Remove the cotter pin from the steering shock absorber ball stud nut.
  6. Remove the steering shock absorber ball stud nut.
    7. Fig 3: Removing the Steering Damper Ball Stud From The Relay Rod
    GM397364Courtesy of GENERAL MOTORS CORP.
  7. Remove the steering shock absorber from the relay rod using J 24319-B .
    8. Fig 4: View Of Steering Shock Absorber Mounting Bolt At Front Crossmember Bracket Nut
    GM291257Courtesy of GENERAL MOTORS CORP.
  8. Remove the steering shock absorber mounting bolt at the front crossmember bracket nut.
  9. Remove the steering shock absorber mounting bolt from the front crossmember bracket.
  10. Remove the steering shock absorber.
  11. Inspect the ball stud threads for damage.
  12. Inspect the ball stud seals for excessive wear.
  13. Clean the threads in the ball stud and the ball stud nut.
scientia non olet · About LEMON Manuals