With Amplifier
WARNING: This page is about a different car, the 2008 Saturn Outlook, 2008 GMC Acadia, and 2008 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Center the balance and fade adjustment on the radio.
- If adjustment of the fade and balance eliminates the concern, review the operation of the radio with the customer.
- Disconnect the harness connector containing the low level audio circuits at the amplifier. Connect a DMM between the suspect low level audio signal circuits. Turn ON the radio and record the AC voltage of the suspect speaker channel. Compare and verify the AC voltage output of the suspect low level audio signal is the same as opposite low level channel.
- If the suspect speaker channel low level audio signal AC voltage is lower than other channels, replace the radio.
- Reconnect the harness connector containing the low level audio circuits and disconnect the harness connector at the individual speakers. Connect a DMM between the suspect speaker signal circuits. With Turn ON the radio and record the AC voltage of the suspect speaker channel. Compare and verify the AC voltage output of the suspect speaker signal is similar to other speakers.
- If the suspect channel speaker signal AC voltage is lower than other channels, replace the amplifier.
- If the recorded AC voltage is the same level as other speaker signal AC outputs, replace the suspect speaker.