Driver or Passenger Seat Adjuster Memory Module Replacement

WARNING: This page is about a different car, the 2013 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Seat Adjuster Memory Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front seat. Refer to Front Seat Removal and Installation - Bucket (W2E) , Front Seat Removal and Installation - Bucket (AQ9) .
1	Front Seat Adjuster Memory Module Procedure Disconnect the electrical connector. Unclip the module from the bracket and slide out through the bottom of the seat. Refer to Control Module References for programing and setup information.

Callout

Component Name

Preliminary Procedure
Remove the front seat. Refer to Front Seat Removal and Installation - Bucket (W2E) , Front Seat Removal and Installation - Bucket (AQ9) .

Front Seat Adjuster Memory Module

Procedure

Disconnect the electrical connector.
Unclip the module from the bracket and slide out through the bottom of the seat.
Refer to Control Module References for programing and setup information.