Scan Tool Output Controls
WARNING: This page is about a different car, the 2005 Pontiac G6. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
| Steering Pos. Sensor Calibration | Power Steering Control Module | After power steering control module (PSCM), or steering column replacement, the scan tool must be used to calibrate the center position of the steering wheel position sensor. |
| Steering Tuning Selection | Power Steering Control Module | After PSCM replacement, the scan tool must be used to select the steering tuning for the vehicle. |
| Torque Sensor Calibration | Power Steering Control Module | After PSCM, or steering column replacement, the scan tool must be used to calibrate the center position of the steering shaft torque sensor. |