Generator Bracket Replacement

GENERATOR BRACKET REPLACEMENT

REMOVAL PROCEDURE




1. Remove the generator.
2. Remove the power steering pump.
3. Remove the engine wiring harness clip bolt (3) are reposition the clip (1) away from the generator bracket.




4. Remove the generator bracket bolts.
5. Remove the generator bracket.

INSTALLATION PROCEDURE




1. Position the generator bracket to the engine.

2. NOTE: Refer to Fastener Notice.

Install the generator bracket bolts.

Tighten the bolts to 50 N.m (37 lb ft).




3. Position the engine wiring harness clip to the generator bracket and install the engine harness clip bolt.

Tighten the bolts to 9 N.m (80 lb in).

4. Install the power steering pump.
5. Install the generator.