LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2009 >> Envoy 4.2 S, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 4.2L - Introduction >> Repair Instructions >> Knock Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: Locating Knock Sensor Components
    GM727528Courtesy of GENERAL MOTORS CORP.
  2. Remove the knock sensor harness connector (4).
  3. Remove the knock sensor retaining bolt (3).
  4. Remove the appropriate knock sensor (1 or 2).
scientia non olet · About LEMON Manuals