LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2010 >> Canyon 4D Pickup, 2.9 9 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - 2.9L - Repair Instructions >> Repair Instructions >> Fuel Line Replacement - Chassis >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: Refer to Fuel and Evaporative Emission Pipe Warning .
WARNING: Refer to Gasoline/Gasoline Vapors Warning .
CAUTION: Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Caution .
    Fig 1: Identifying Chassis Fuel Feed And EVAP Line Quick Connect Fittings
    GM1766566Courtesy of GENERAL MOTORS CORP.
  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (Without CH-48027)  or Fuel Pressure Relief (CH 48027) .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Disconnect the chassis fuel feed line quick connect fitting (2) from the engine line. Refer to Plastic Collar Quick Connect Fitting Service .
    4. Fig 2: Identifying Chassis Fuel Feed Line Quick Connect Fitting
    GM1766200Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the chassis fuel feed line quick connect fitting from the fuel tank line. Refer to Plastic Collar Quick Connect Fitting Service .
    5. Fig 3: View Of Fuel Feed Line Clips
    GM1766576Courtesy of GENERAL MOTORS CORP.
  5. Disengage the fuel feed line from the clips (1).
  6. Remove the chassis fuel feed line (2) from the vehicle.
scientia non olet · About LEMON Manuals