Throttle Body Assembly Replacement

Fig 1: View Of Throttle Body Assembly

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten: 10 N.m (89 lb in)
2	Throttle Body Procedure Disconnect the throttle body harness connector. Install a NEW throttle body seal. Perform the throttle learn procedure. Refer to Throttle/Idle Learn (LF1, LFW) .

Callout

Component Name

Preliminary Procedure:
Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .

Bolt (Qty: 4)

CAUTION: Refer to Fastener Caution .

Tighten: 10 N.m (89 lb in)

Throttle Body

Procedure