Automatic Level Control (ALC) Trimset Procedure

If the system is functioning abnormally, performing the ALC Trimset recalibration procedure may correct the condition. When a system component has been replaced, ALC Trimset calibration must be performed.

1. Ensure that the vehicle has a full tank of fuel or add sufficient weight to the rear of the vehicle to simulate a full tank of fuel.
2. Place the vehicle on a flat level surface. Ensure that the suspension is in the normal resting position. With a scan tool, perform the ALC Trimset procedure by following the screen prompts.

Once the process has been completed, the system should be fully functional.