LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2016 >> Canyon SL >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Front Wheel Speed Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING:

Refer to Brake Dust Warning .

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
    3. Fig 1: Wheel Speed Sensor Electrical Connector
    GM3683620Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the wheel speed sensor electrical connector and release the connector (1) from the retainer on the frame rail.
    4. Fig 2: Front Wheel Speed Sensor Harness Clips
    GM3683622Courtesy of GENERAL MOTORS COMPANY
  4. Release the front wheel speed sensor harness clips (1) from the vehicle frame.
    5. Fig 3: Front Wheel Speed Sensor Harness Bracket Bolt
    GM3683627Courtesy of GENERAL MOTORS COMPANY
  5. Remove the front wheel speed sensor harness bracket bolt (1).
    6. Fig 4: Wheel Speed Sensor Bolt
    GM3683633Courtesy of GENERAL MOTORS COMPANY
  6. Thoroughly clean the wheel speed sensor mounting area of the steering knuckle of any dirt and debris.
  7. Remove the front wheel speed sensor bolt (1).
    8. NOTE:

    Do not pry or lever against the wheel speed sensor to remove.

  8. Carefully remove the wheel speed sensor from the suspension knuckle by pulling straight outward.
scientia non olet · About LEMON Manuals