LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2016 >> Canyon SL >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (LWN) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Generator And Generator Bolt
    GM4154245Courtesy of GENERAL MOTORS COMPANY
  1. Install the generator (2)
    2. CAUTION:

    Refer to Fastener Caution

  2. Install Generator Bolt (1) and tighten 58 N.m (43 lb ft)
    3. Fig 2: Generator Terminal Protective Boot
    GM4154242Courtesy of GENERAL MOTORS COMPANY
  3. Connect the electrical connector (4)
  4. Install Battery Positive Cable (3).
  5. Install Generator Nut (2) and tighten 15 N.m (11 lb ft)
  6. Install Generator Terminal Protective Boot (1).
    7. Fig 3: Drive Belt
    GM4144712Courtesy of GENERAL MOTORS COMPANY
  7. Install Drive Belt (2).Drive Belt Replacement
    8. Fig 4: Engine Coolant Fan Rear Shroud Upper Bolts
    GM4167477Courtesy of GENERAL MOTORS COMPANY
  8. Install the engine coolant fan rear shroud upper bolts (1).Engine Coolant Fan Rear Shroud Replacement (LWN)
    9. Fig 5: Charge Air Cooler Outlet Duct
    GM4139728Courtesy of GENERAL MOTORS COMPANY
  9. Install Charge Air Cooler Outlet Duct (3).Charge Air Cooler Outlet Duct Replacement
  10. Connect the negative battery cable. Battery Negative Cable Disconnection and Connection 
scientia non olet · About LEMON Manuals