LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2017 >> Acadia SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Object Detection System And Pedestrian Protection System) >> Repair Instructions >> Front Seat Lane Departure Warning Actuator Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Seat Lane Departure Warning Actuator Replacement

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Seat Lane Departure Warning Actuator
GM3417371Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
WARNING:

Refer to SIR Warning .

Preliminary Procedure

  1. Remove the front seat. Refer to Driver or Passenger Seat Removal and Installation .
  2. Remove the front seat cushion cover and pad. Refer to Front Seat Cushion Cover and Pad Replacement (Sedan with AHE)Front Seat Cushion Cover and Pad Replacement (Sedan without AHE)Front Seat Cushion Cover and Pad Replacement (Coupe)Front Seat Cushion Cover and Pad Replacement (with W2E) .
1 Front Seat Lane Departure Warning Actuator Topper Pad (Qty: 2)

Procedure

  1. Gently peel away the topper pad from the seat cushion pad.
  2. When removing the topper pad be careful not to damage the motor.
NOTE:

The topper pad must be replaced every time the motor is replaced.
2 Front Seat Lane Departure Warning Actuator Motor (Qty: 2)

Procedure

  1. Reposition the heater element as needed to gain access to the actuator wire.
  2. Cut the original actuator wire that connects to the main harness and splice in the new actuator wire. Refer to Splicing Copper Wire Using Splice Sleeves
  3. Remove the original actuator and discard it.
  4. Note the routing of the original wire and harness location for installation.
NOTE:

Adjust the splice location so that each splice is at least 40 mm (1.5 in) away from other splices, harness branches, or connectors.
scientia non olet · About LEMON Manuals