Installation Procedure
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Install Brake Pedal Position Sensor (1)
- Install Brake Pedal Position Sensor Bolt (1) and tighten 2.5 N.m (22 lb in)
- Connect Brake Pedal Position Sensor Electrical Connector
- Install Floor Front Air Outlet Duct Floor Front Air Outlet Duct Replacement - Left Side
- Calibrate the brake pedal position sensor. Brake Pedal Position Sensor Calibration
NOTE:
Position the fork of the brake pedal position sensor over the brake pedal arm pin.
CAUTION: