Fastener Specifications (Holden)
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Intermediate Steering Shaft Lower Bolt | 55 N.m (41 lb ft) |
| Intermediate Steering Shaft Upper Bolt | 42 N.m (31 lb ft) |
| Steering Column Lock Control Module Bolt - Front | 9.5 N.m (7 lb ft) |
| Steering Column Lock Control Module Bolt - Rear | 9.5 N.m (7 lb ft) |
| Steering Column Lower Trim Cover Bolt | 2.5 N.m (22 lb in) |
| Steering Column Nut Refer to procedure for tightening sequence and torque values. |
Steering Column Replacement (Holden with N37) |
| Steering Wheel Bolt | 45 N.m (33 lb ft) |
| Steering Wheel Rear Switch Screw | 3.5 N.m (31 lb in) |
| Steering Wheel Screw | 1.1 N.m (10 lb in) |
| Steering Wheel Spoke Cover Screw | 1.1 N.m (10 lb in) |