Installation Procedure
Install the generator.(2)
- Generator Bolt(1)Install and tighten[2X]58 N.m (43 lb ft)
Battery Positive Cable(3) - Install
- Generator Nut(2) - Install and tighten15 N.m (11 lb ft)
- Generator Terminal Protective Boot(1) - Install
- Connect the electrical connector.(4)
Drive Belt(2) - Install - Drive Belt Replacement
Charge Air Cooler Outlet Duct(3) - Install - Charge Air Cooler Outlet Duct Replacement
Intake Manifold Cover(3) - Install - Intake Manifold Cover Replacement
- Connect the negative battery cable. Battery Negative Cable Disconnection and Connection
CAUTION:
Refer to Fastener Caution