Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON/Vehicle In Service Mode, engine OFF.
- Verify DTC U3000 is not set.
- If DTC U3000 is set with symptom byte 51, 54, 55, and 56.
- Perform all necessary programming and setup procedures for the control module that sets the DTC.
- Verify the DTC does not set.
- If the DTC sets, replace the control module that sets the DTC.
- Go to next step: If the DTC does not set
- All OK.
- If DTC U3000 is set active or in history with any symptom byte, except 51, 54, 55, and 56.
Replace the control module that sets the DTC.
- Go to next step: If DTC U3000 is not set
- All OK