Installation Procedure
WARNING: This page is about a different car, the 2021 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Electrical Connector @ Electronic Suspension Control Module - Connect
- Install the electronic suspension control module (1) until it is fully seated into the electronic suspension control module bracket (2) and secured by the tab as indicated.
- Electronic Suspension Control Module (2) - Install
- Electronic Suspension Control Module Bracket Nut (1)[3x] - Install and tighten 9 N.m (80 lb in)
- Install the acoustic treatment.
- Install the spare tire.
- Load Floor Trim Panel (2) - Install - Load Floor Trim Panel Replacement (All Terrain)
- Program the electronic suspension control module. Control Module References
CAUTION:
Refer to Fastener Caution .