Oil Pump Flow Control Valve Heat Shield Replacement

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedure  Raise and support the vehicle. Lifting and Jacking the Vehicle
1	Oil Pump Flow Control Valve Heat Shield Fastener CAUTION: Refer to Fastener Caution . Tighten  58 N.m (43 lb ft)
2	Pump and Component Oil Heat Shield Fastener [2x] Tighten  9 N.m (80 lb in)
3	Oil Pump Flow Control Valve Heat Shield