Removal Procedure
- Battery Negative Cable - Disconnect - Battery Negative Cable Disconnection and Connection (KL9)
Fuse Block Cover (1) - Remove
Starter Solenoid Cable Nut (1) - Remove
- Starter Solenoid Cable (2) - Reposition
Battery Positive Cable Nut (1) - Remove
- Remove the small wire.
- Battery Positive Cable (2) - Remove
Disconnect the body wiring harness connector. (1)
Body Wiring Harness Terminal Nut (1) - Remove [ 4x ]
- Generator and Starter Nut (2) - Remove
- Wiring Harness Terminal - Remove [ 5x ]
Unclip the fuse block tabs (1) and remove from the battery.