Circuit/System Testing
- Ignition OFF and all vehicle systems OFF.
- Inspect the K5 Automatic Level Control Module and Air Suspension Controller for damage.
- If damage is found
Replace the damaged component
- Go to next step: If damage is not found
- If damage is found
- Verify the K5 Automatic Level Control Module software is up to date.
- If the software is not up to date
- Perform the programming and setup for the K5 Automatic Level Control Module.
- Verify DTC C1175 does not reset.
- If DTC sets
Replace the K5 Automatic Level Control Module and the Air Suspension Controller.
- Go to next step: If the DTC does not set
- If DTC sets
- All OK.
- Go to next step: If the software is up to date
- Replace the K5 Automatic Level Control Module and the Air Suspension Controller.