Air Cleaner Monitor Setup: Description

For an overview of the component/system, refer to: Owner's manual

The Air Cleaner Monitor Setup is used to inform the driver when the next service interval is required. The Air Cleaner Monitor displays the Air Cleaner Life Remaining as a percentage. The Air Cleaner Monitor Setup can be used to Disable/Enable the monitor and Reset the Air Cleaner Life Remaining percentage.

The control module K20 monitors the following:

• Air Cleaner Monitor Test Result
• Ambient Air Temperature
• Distance Traveled
• Engine Coolant Temperature
• Engine Load
• Engine Speed
• Humidity Sensor Intake Air Temperature Signal
• Time Since Last Service Interval Reset
• Total Mass Air Flow
• Vehicle Speed

If maintenance is required a message will be activated via serial data @ P16 Instrument Cluster - P9 Driver Information Center Display

This procedure resets the control module learned values of the component/system: Air Cleaner Monitor