Removal Procedure
- Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection
Plenum Front Panel Outer Reinforcement (1) - Remove - Plenum Front Panel Removal and Installation (UXA) , or Plenum Front Panel Removal and Installation (-UXA)
{If equipped} Intake Manifold Cover Bolt (1) - Remove [2x]
- If equipped, lift up on the front of the intake manifold cover (2).
{If equipped} Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Remove
Fuel Pump Shield Bolt (1) - Remove [2x]
- Fuel Pump Shield Bolt (2) - Remove [2x]
- Fuel Injection Pump Bracket (3) - Remove