Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Apply a light coat of wheel speed anti-corrosion grease to the rear wheel speed sensor (1) and mounting pad on the rear suspension knuckle. Adhesives, Fluids, Lubricants, and Sealers
Rear Wheel Speed Sensor (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Rear Wheel Speed Sensor Bolt (1) - Install and tighten 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Position the wiring harness and connect the harness retainers and the electrical connector. (1)
Install the tire and wheel assembly. Tire and Wheel Removal and Installation