LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2024 >> Canyon AT4 >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> K219 Lighting Control Module: Programming and Setup >> Replace and Program Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Replace and Program Control Module

To program a replacement control module, perform the following procedure:

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, under Select Controller, select K219 Lighting Control Module.
  3. On the SPS Supported Controllers screen, under Select Function / Sequence, select Programming and follow on screen instructions.
  4. On the SPS Supported Controllers screen, under Select Function / Sequence, select Setup and follow the on-screen instructions.
  5. Clear All DTCs.
scientia non olet · About LEMON Manuals