LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2017 >> G80 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Control System - 5.0L) >> Inspector Drive Box >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF and disconnect the negative (-) battert cable.
  2. Remove the ECM & TCM & IDB cover (A).
    G11336622
  3. Disconnect the ECM connector (A), and then disconnect the IDB connector (B) and the TCM connector (C).
    G11336623
  4. Remove the ECM & TCM & IDB bracket installation bolts (A) and nut (B).
    G11336624
  5. After removing the installation bolts (A), remove the TCM (B) from the bracket.
    G11336625
  6. After removing the installation nuts (A), remove the IDB (B) from the bracket.
G11336626
scientia non olet · About LEMON Manuals