Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.

Fix the brake pedal arm and insert the stop lamp switch with the contact part hidden.

Courtesy of
After inserting, turn the stop switch (A) 45° clockwise, and then assemble the locking plate (B) by pushing it.

Courtesy of
Confirm the gap between stop lamp switch and bracket.
Stop lamp clearance: 1.0 ~ 2.0 mm (0.04~ 0.08 in.)

Courtesy of

NOTE: If the gap between stop lamp switch and bracket is less than 1.0~2.0 mm (0.04~0.08in), perform the process above again.
Connect the stop lamp switch connector.
Install the knee air bag.
(Refer to Restraint - "KNEE AIRBAG (KAB) MODULE ")
Install the lower crash pad.

(Refer to CRASH PAD Body )