Repair Procedures: Inspection

WARNING: This page is about a different car, the 2016 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "BATTERY ")
Disconnect the solenoid valve connector (A).

Fig 1: Disconnecting Solenoid Valve Connector
Courtesy of KIA MOTORS AMERICA, INC.
Measure the resistance between power terminal (14) and signal terminal (8).
Specification: Approx. 0.88 MΩ

Fig 2: Solenoid Valve Connector Terminal
Courtesy of KIA MOTORS AMERICA, INC.