Neutralization Status Check

WARNING: This page is about a different car, the 2016 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
After IG ON, select the "Neutralization mode".

Fig 1: Display - Neutralization Status Check Screen (1 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Display - Neutralization Status Check Screen (2 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.
Select the "ECM Neutralization" or "SMK Neutralization".

Fig 3: Selecting ECM Neutralization Screen
Courtesy of KIA MOTORS AMERICA, INC.

Fig 4: Selecting SMK Neutralization Screen
Courtesy of KIA MOTORS AMERICA, INC.