Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.

Remove the nut (B) and clip (C).
Remove the shift cable (A) assembly from the transmission.
Tightening torque:

12.7 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb-ft)

Courtesy of
Remove the floor console.
(Refer to Body - "FLOOR CONSOLE ")
Disconnect the shift cable (A) from the shift lever.

Courtesy of
Remove the shift cable assembly (B) by removing the nuts (A).
Tightening torque:

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

Courtesy of
Pull the rubber plug from the floor and pull out the shift cable assembly.