Repair Procedures: Removal
- Turn ignition switch OFF and disconnect the negative (-) battery cable.
- Remove the rear wheel and tire (A) from the rear hub.
Tightening Torque:
88.3 - 107.9 N.m (9.0 - 11.0 kgf.m, 65.1 - 79.6 lb-ft)
- Remove the wheel speed sensor bracket bolt & wheel speed sensor (A).
Tightening Torque:
6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 8.0 lb-ft)
- Install in the reverse order of removal.