LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2019 >> G90 3.3T Premium, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Knock Sensor (KS) >> Repair Procedures >> Removal >> [Knock Sensor #2 (Bank 2)]
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

[Knock Sensor #2 (Bank 2)]

  1. Remove the RH engine mounting support bracket.

    (Refer to Engine Mechanical System - "ENGINE MOUNTING ")

  2. Disconnect the knock sensor connector (A).
    G12715650Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the installation bolt (A), and then remove the sensor from the cylinder block.
    G12715651Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals