Major Features: Notes

WARNING: This page is about a different car, the 2017 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.

Display Vehicles Surrounding in Video
The surrounding area video display function displays the 360 degrees video image captured through 4 cameras to the driver through the Head Unit Screen while the vehicle is moving at low speed or going reverse. The Multi-view Camera System displays total of 8 video modes for displaying surrounding video based on the vehicle driving state and the driver's selection.
Guide Line Indication & Steering Wheel Synchronized Feature
The Guide Line Indication & Steering Wheel Synchronized Feature is the function that assists the driver in parking by synchronizing the steering wheel with the rear view video display marked with a guide line to help anticipate the direction of the vehicle going reverse.
Front/Rear Object Warning (Obstacle Detection Feature)
The system receives obstacle warning signal from the PAS sensors mounted on the front/rear of the vehicle and displays the obstacle location on the Multi-view Camera System Unit Screen.
Tolerance Compensation (including A/S)
Manual Tolerance Compensation Software is embedded in the Multi-view Camera System Unit to compensate the Multi-view Camera deviation that may occur due to assembly line installation tolerance. You must first setup proper work environment in order to perform correct tolerance compensation.